Feature: . 9 Egg Capacity: The automatic incubator can hold 9 eggs, which can chickens, ducks and other poultry, as well as quails, parrots, pigeons and other birds, easy to clean and easy to use. 2. Digital Display: incubator adopts digital display to show important information such as the current temperature. Digital temperature control allows temperature setting and easy operation. 3. Transparent Cover: hatching incubator makes use of transparent cover above , you will be able to see the whole hatching process without interruption and feel the of giving birth. 4. Microcomputer Chip: Using microelectronic technology and components with strong anti interference ability and high working stability. Accurate sensor ensures high acquisition accuracy and wide detection range. 5. Sink Design: Adopt base sink design to add the corresponding amount of water according to the required humidity to ensure that the humidity in each area is within the normal range. Specification: Item Type: Automatic Egg Incubator Material: Plastic Weight: Approx. 1530g/3.3lb Product Assembly Size: Approx. 25.5x14cm/10.0x5.5in Temperature Display Range: 0-99.9& 8451; Temperature Measurement Accuracy: ±0.& 8451; Voltage: DC 12V (connected to battery), US 110-240V Relative Humidity: Less than 85% Ambient Temperature: -20& 8451; to 70& 8451; Egg Capacity: 9 pieces Egg Detector Battery: 3PCS AAA (delivered without battery) Uses: chickens, ducks and other poultry, quails, parrots, pigeons and other birds How to Use: . Temperature setting method Under normal working conditions, short press the SET button, and the temperature window will flash and display the current set temperature value. At this time, you can click the + button or - button to adjust to the desired temperature. After the setting is completed, you can press the SET button to exit or do not operate the key for more than 10 seconds, the system will automatically exit the setting state, and the previously modified parameters will be automatically saved. 2. Add + In the setting state, click the + key (short press) to adjust the parameter value; long press the + key to continuously adjust the parameter value. 3. Reduce - In the setting state, click the - key (short press) to adjust the parameter value; long press the - key to continuously adjust the parameter value. 5. Lighting In normal state, click the Lighting button to turn on/off the light. 6. How to restore factory settings In the normal working state, long press and hold the + key and the - key for more than 5 seconds, the buzzer will beep once, and the full screen will display & 26085;.& 26085;.& 26085;, and it will return to normal working state after 5 seconds. All parameters are restored to the factory default values, and the temperature value after restoring the factory is 37.8 degrees. 7. Sensor error prompt When the temperature sensor fails or is not connected, the temperature display window displays EEE, and the electric heating stops working.