Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

¥7,890
+ 配送料¥2,399

Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

  • ブランド: Unbranded

Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

  • ブランド: Unbranded
希望小売価格: ¥24,990
価格: ¥7,890
得する金額: ¥17,100 (68%)
販売元:
¥7,890
+ 配送料¥2,399

在庫あり

以下の支払い方法を利用することができます

説明

1Welding power can be powered by lithium battery or 12V car battery. 2The controller adopts single chip microcomputer control, accurate output pulse, LCD display screen, can display welding parameters. 3The soldering pen and the input wire are connected by Ushaped coldpressed terminals, which is convenient for disassembly and replacement. 4The controller adopts automatic welding mode, while retaining the manual trigger interface, you can choose according to your own usage. 5The power board uses 2 ounces of copper, and the soldering pen wire and the input wire use 10AWG multiwire soft wire to increase the overcurrent capacity. 6Five 300A MOS tubes are driven by imported special chips, and the MOS tubes can be used as fast as 20nS, which can switch quickly to prevent tube explosion. 7The controller is mainly for welding 0.1mm to 0.15mm nickelplated steel strip, and the power input adds a 25V10000uF highfrequency lowresistance capacitor for energy compensation to increase stability.Item Type: Mini Spot WelderProduct Description:1: This controller is mainly used for welding small battery repair power banks, power tools, model airplanes, etc.2: This controller requires users to have a certain electronic basis and safety awareness.3: Although sufficient protection has been done for the drive of the MOS tube, it is inevitable that the explosion tube will appear during use. If there is a explosion tube, just replace one.4: For those with high welding requirements, please change the welding power source. After actual testing, when the battery uses 3S, 40C, 5000mHA, it can weld 0.1mm nickel-plated steel strip and 0.15mm nickel-plated steel strip perfectly. The welding needle needs to be ground into a round head, the pressing force is reduced, and it can also be welded; When the battery uses 12V, 50AH car level, it can weld 0.15mm nickel-plated steel strip perfectly. Note that it is a car battery, not an ordinary lead-acid battery.Size: Approx. 0.1 ~ 0.15mm / 0 ~ 0.01in1 x Spot Welder1 x Connector2 x Power Input Line2 x Soldering PenPlease note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
  • Fruugo ID: 341577521-748850994
  • EAN: 653582880708

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Not suitable for children under 36 months, Adult supervision recommended

配送と返品

3日間以内に発送

  • STANDARD: ¥2,399 - 間の配達 水 19 11月 2025–水 26 11月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • Shenzhen Xunxing Xiangcheng Foreign Trade Technology Co., Ltd.
  • Shenzhen Xunxing Xiangcheng Foreign Trade Technology Co., Ltd.
  • Room 201-08, Xiangqian Building, No. 4012, Longgang Avenue (Longgang Section), Nanlian Community
  • Shenzhen
  • China
  • 518116
  • chenghduyubin5542@outlook.com
  • 86 134 21832945

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • IVAN VOLENYUK KOROLYUK
  • IVAN VOLENYUK KOROLYUK
  • 24(medio), Calle Cadiz, 12006, Castellon de la Plana, Castello, Spain
  • Castellon de la Plana
  • Spain
  • 12006
  • vanvolenyuk@outlook.com
  • 34662164290