Waste Oil Burner for Cooking and Heating Efficient Combustion Furnace This waste oil burner is designed for efficient combustion of used motor oil. Featuring a high-pressure electric blower, it ensures thorough burning of waste engine oil for heating, cooking, and similar applications. Testing shows that it can boil 1 kg of water in approximately 3 minutes after ignition, helping users make practical use of recycled oil. Constructed from galvanized steel, the unit is built to withstand high-temperature operation. Note that the furnace may appear red during use due to heat exposure, which is normal and does not affect performance. The blower operates on a 512V DC input. Setup and Usage Instructions: 1. Provide a waste oil container and connect it to the furnace using an external valve at the oil outlet. 2. Open the valve to allow oil to flow into the combustion chamber until reaching a depth of 1 cm, then close the valve. 3. Ignite a small amount of combustible material, such as paper, and place it inside the furnace to initiate burning. 4. Turn on the blower and allow the oil to ignite gradually. Adjust airflow as needed to control flame intensity. 5. Once combustion begins, open the oil inlet valve to maintain continuous fuel supply. Flame output will increase as internal temperature rises. Designed for safe and effective reuse of waste oil in appropriate environments. Always follow safety guidelines when handling flammable materials.