Specification 1. Light source 2LM LEDs*6PCS RGB 5050 LEDs*1PCS 2. Solar panel: Polysilicon 2v * 130mA 3. Battery: Ni-MH AA 12 V / 1000 mA 4. Material: ABS+PC 5. IP rate: IP55 6. Charging time:> 6H 7. Working time:> 8H, RGB> 16H Installation 1.Please drill 2 holes with appropriate distance on the wall. 2. Insert the screws into the holes. 3. Hang the product on the screws. 4. Open the ON/OFF switch and configure the lighting mode. Solar charging. Energy saving and environmental protection. No cable to connect, safe and reliable battery with long life. They are IP55 waterproof and can be used at any time. outside. Such as gutter, garden, yard, fence, etc. Warning 1. Away from the fire source, preventing the battery from exploding. 2. Avoid high temperatures, humidity and corrosive environments as they may affect product life. 3. If the product is not used for a long time, it needs to be charged. Every 3 months. 4. Solar modules can achieve the efficiency highest charge in direct sunlight. The loading time is influenced by by different seasons.