Feature: 1. Compact one‑piece sheet, seamless surface, no water leaking, smooth appearance. 2. PC hollow sheet, UV‑resistant, good transmittance, helps lower the heat of blazing sunshine & cool down the indoor temperature. 3. Bracket is made by high quality PP, can withstand wind/rain storms, light snow, load up to 33lbs. 4. Easy to install and DIY, comes with a clear instruction, easy to put together and install. 5. It can block direct sunlight, keep the rain and snow off the door when open, well protect your furniture, floor, window, door. Specification: Item Type: Awning Material: PC Hollow Sheet+PP Bracket+Aluminium Panel Color: As shown in the picture Product Assembly Size: Approx.100x200x24cm/39.4x78.7x9.4in How to Use (see the instructions for details): 1. Place the top plate on the connecting profiles, and place the front on the wall profiles. 2. Put nails on the bracket and roof slab. 3. Fix the bracket to the front profiles and wall profiles with screws, and fix the inner bracket from the bottom to the front profiles and wall profiles with screws. 4. Put the roof slab on the connecting profiles and the front panel on the wall profiles. 5. Put nails on the bracket and roof slab. 6. Fix the bracket to the front profiles and wall profiles by screws, and then put the second part of the canopy on the first part. 7. Fix the interior with screws from the bottom to the front contour, tighten all the screws on the contour of the wall, then fix the awning on the contour of the wall, then tighten all the screws, and then fix the awning on the wall. . Package List: 4 x PC Sheet3 x Bracket2 x Front Profiles2 x H Rod2 x Bracket Rod1 x Bag of Screw1 x Instruction Manual Note: 1. Please allow 1‑2in error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.3. Please kindly note that you will receive several of spare parts, you need to assemble by yourself. 4. The protective film of the PC sheet should be removed.