説明
Description:
Condition:100% Brand New
Color of Light Source:Red/Green/Blue
Item Name:Speed Gear Display Indicator
Size:4cm*4cm*4cm/1.57inch*1.57inch*1.57inch
Fitment:
compatible for Kawa-saki ER-6F 2012-2017
compatible for Kawa-saki ER-6N 2012-2017
compatible for Kawa-saki KLE650 2010-2017
compatible for Kawa-saki 250R(Fi model) 2013-2015
compatible for Kawa-saki 300 2013-2018
compatible for Kawa-saki 400R 2013-2016
compatible for Kawa-saki 400 2018
compatible for Kawa-saki 650 2012-2016
compatible for Kawa-saki 1000 2011-2016
compatible for Kawa-saki 650 2010-2018
compatible for Kawa-saki 1000 2012-2018
compatible for Kawa-saki VN900 2011-2015
compatible for Kawa-saki S 650 2015-2018
compatible for Kawa-saki 900 2011-2018
compatible for Kawa-saki W800 2011-2017
compatible for Kawa-saki Z300 2015-2016
compatible for Kawa-saki Z650 2017-2018
compatible for Kawa-saki Z750 2010-2012
compatible for Kawa-saki Z750R 2011-2012
compatible for Kawa-saki Z800 2013-2017
compatible for Kawa-saki Z800e 2013-2017
compatible for Kawa-saki Z1000 2010-2016
compatible for Kawa-saki Z1000SX 2011-2016
compatible for Kawa-saki ZX-6R 636 2006
compatible for Kawa-saki zx10r 2009
compatible for Kawa-saki ZRX1200 2011-2015
compatible for Kawa-saki Brute compatible for ce 750() All Years
compatible for Kawa-saki Mule () All Years
compatible for Kawa-saki Teryx () All Years
(If you encounter any questions, please be sure to contact me first, please do not leave negative comments first, I very much hope to answer your questions, thank you)
Feature:
Shows current gear number
Indicates current gear from 1 to max of 6. as well as a neutral indicator.
Detects the current gear faster than other gear indicators that use speedometer/tachometer signal.
Display can be mounted anywhere
compatible for eword:
Congratulations on your purchase of a SEPP gear position indicator,This product will fit all Kawa-saki fuel injected(EFI)motorcycles which have on board Diagnostic System connector. This connector is referred as KDS(Kawa-saki Diagnostic System) in the Kawa-saki manuals.Unlike other gear indicators available compatible for your bike,this product connects to the diagnostic connector.It make the installation very sample. The unit reads data directly from the ECU, offering faster and more reliable readings than competing products.The display is auto learning,there are no button and no programming wire Know limitations;Your bike is not equipped with Gear Position Sensor. therecompatible for e determining the gear in use is only possible when the engine is running and the clutch is released.
Installation:
1. Find the 4-pole diagnostic connector (also called as KDS) under the seat, near the ECU module (Black, Grey, or semi-transparent plug).
2. Normally it has a removable semi-transparent cap or ?dummy? plug (without wires) attached to it. The connector may be partially covered by black tape.
Note: You may find TWO of this connector on your bike. In this case, try both connectors, but only one of them will supply data to the GFY-K01. It will not harm your bike if you connect the GFY-K01 to the wrong plug first.
3. Detach the cover (cap) from the plug and connect the GFYSHIP plug.
4. Route the cable to the mounting location along the frame. Peel the green plastic off from the back of the unit, and mount the display.
5. Secure the cable with the cable ties supplied, ensuring that the steering movement is not impaired by the cable.
Troubleshooting:
You may find TWO semi-transparent connectors on the bike with a removable cap or dummy plug.Try the second one if the unit does not work from the first one.Disconnect the SEPP connector and check whether the pins are broken,bent or pushed out of position.Reconnect the plug,and make sure that all connections are good and the connector is fully seated.If you can not execute the setup procedure,your battery might be old or weak.Charge the battery or connect another battery using a jumper cable.If some gears are not indicated properly when the engine is running and clutch is released,rest the unit and setup again.If the problem persists.your clutch might be slipping.
Package List:
1 x Motorcycle Speed Gear Display
-
Fruugo ID:
342185788-749918098
-
EAN:
9441574313027
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
Important Safety Instructions
Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction.
General Warnings
Intended Use: Use this product only for its intended purpose as described in the user manual.
Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision.
Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged.