Features:_x000D_1. EFFECTIVE ADHESIVE AGENT - Developed as an alternative to torch welding, it provides strong and long-lasting repairs to metals and multiple other surfaces. It will bond almost any clean surface that is free of dirt and oil._x000D_2. HIGH-TEMPERATURE RESISTANT - can withstand temperatures up to 150degC. When fully cured, it is as hard as iron and provides uniform bond line thickness._x000D_3. SUPERB BOND STRENGTH - It forms a strong and stable permanent bond that should last for ages. It can be shaped, tapped, filed, sanded and drilled depending on its purpose._x000D_4. EASY AND FAST DRYING APPLICATION - The preparation and application are simple and easy. Just mixes, apply, and let it dry for a few hours. The full cure time is up to 24 hours._x000D_5. WIDE USE - Mainly used for iron and steel casting, sand holes and pores, and filling of casting defects such as cracks. It can be used to repair fuel tanks, plumbing, concrete breaks, and a whole lot more._x000D_Notice:_x000D_1. Actual color may be slightly different from the image due to different monitor and light effect. Please allow minor deviation due to manual measurement._x000D_Specification:_x000D_Type: Metal Repair Paste_x000D_Content: 60g/100g_x000D_Base material: resin sealant_x000D_Curing time: 20 minutes_x000D_Density: 300_x000D_Hardness: 200_x000D_Shear strength MPa: 20_x000D_Tensile strength Mpa: 20_x000D_Curing method: air humidity_x000D_Elongation at break : 30_x000D_Extrusion rate: 98_x000D_Surface drying time min: 5_x000D_Function: Adhesive seal_x000D_Application: metal, iron, steel bondingPackage List:_x000D_1 x Metal Repair Paste