Brand new and high quality Features: When you usually use your joy-con, your grip will not catch the joy-con, easy to run out, but this buckle can solve your problem. How to use: Tip 1: be careful of the orange flat wire between the top and bottom of the joy con for case. then you need to open the joy con for case carefully. be careful of the spring when you remove the original buckle. Tip 2: left and right lock buckle are different. be careful not to turn them over. when you remove the original buckle, there is a little iron. you can use the tweezers to pull it out. 12 in 1 buckle lock only for Joycon Set , other accessories demo in the picture is not included. Specification: Material: metal Screwdriver Length: app.12.8cm or 5.04in Color: As the pictures shown Quantity: 1 Set Note: No retail package. Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Contents: 1 Set x 12 in 1 Buckle Lock for Joycon