for DJI Mavic 4 Pro outside float height-increasing tripod buoyancy rod landing gear accessories Product Features 1.for Mavic 4 Pro water outside floating height-increasing tripod, effectively increase height and reduce wear. Reducing the wear of the chassis can better protect the fuselage and the pan-tilt. 105mm height-increasing tripod reduces wear. The floating device can also be removed and used alone with a height-increasing tripod, effectively increasing the height by 36mm 2. The tripod and buoyancy rod weigh only 112g and hardly increase the flight burden. The elastic straps are easy to install and disassemble, and can be reused. 3. Precautions for use: The buoyancy rod can only take off and land on calm water outside and must not be installed on wavy water outside, otherwise there is a risk of overloading. Due to the heavy weight of the lens, the reserved length at the front end of the buoyancy rod should be about twice that at the rear end. Product parameters Net weight of the product: 112g Gross weight of the product: 266g Product dimensions: Tripod: 21.5*10.7*1.9cm/ Buoyancy bar: 32*6*6cm Packaging size: 34*16*10cm box