Description:Features:1 TUBE = Alterations, slight wear on a small area4 TUBES (RECOMMENDED) = Armchair, car seat, damaged in several moderately large areas10 TUBES = Sofas, or complete car upholstery rather very damagedUse the color that most closely matches the color of the part to be repaired. BELINO-CUIR liquid leather for repair is a repair product and not a dye. It may therefore be necessary to use a paint or stain for leather and vinyl for an optimal rendering.If you cannot find a matching color for your leather or vinyl, use the color NEUTRAL. The NEUTRAL color contains a white tint for the repair to be perfect. It may therefore be necessary to use a paint for leather and vinyl for an optimal rendering.You will find our range of leather paints here: our BELINO leather and vinyl paintsFor large tears or cracks, we recommend that you repeat step 2 and 3 several times for optimal results.If you wish to re-color your leather after this repair, we recommend that you lightly level the repair area using 2000 grit sandpaper before applying the color.20ml tube. Surface re-coloring after application may be necessary to unify the restoration of your surfaces.Specifications:MANUAL :1. Clean and degrease the surface to be repaired2. Apply the liquid leather with a spatula, spreading it evenly3. Wait for the surface to dry or use a hair dryer4. The repair is completePackage Included:1*20ml Leather Repair Gel or 1*50ml Leather Repair GelNote:1. Due to manual measurement, there may be a slight tolerance of 1-3cm.2. Due to difference between different monitors, the picture may not reflect the actual color of the item.