Features: and high quality Made of high quality material, and practical to use This fantastic Trailer Light Converter made by is designed for separating "stop" signal from the Two-Wire System US Vehicle to connect your European Trailer (caravan, boat trailer, bike carriers and others). It provides a electrial solution that if you have a US vehicle with 4 way flat, and you want to hook up a European trailer, with a 7-way Round Pin. If your US vehicle has the 4-Pole flat connector, and your European trailer has the 7 pin round plug, where your US car need to separate the stop and tail signals, this Trailer Wiring Adapter need to be use. This electrical converter allows to change a US style 4-way flat plug to a European style 7-pin connector Installation Guide: a) Before connecting the Converter to the vehicle, check that all signals on the car have been turned off. b) Connect the Converter to the existing US 4 way connector in the vehicle. c) Insert the other side EU trailer plug into the socket Converter. d) Check that all connections are safety fastened. e) When exploitation, maintenance of the electrical adapter is not required. Material: plastic colour: black Package Contents: 1 x Trailer Connector Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.