New PN532 NFC RFID Module V3 Kits Reader Writer Board For Android Phone

¥3,799
配送料無料

New PN532 NFC RFID Module V3 Kits Reader Writer Board For Android Phone

  • ブランド: Unbranded

New PN532 NFC RFID Module V3 Kits Reader Writer Board For Android Phone

  • ブランド: Unbranded
価格: ¥3,799
販売元:
¥3,799
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

New PN532 NFC RFID Module V3 Kits Reader Writer Board For Android Phone

We've taken our popular PN532 breakout board and turned it into a shield - the perfect tool for any 13.56MHz RFID or NFC application. The mini NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC. This chipset is very powerful, and can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. While the controller has many capabilities, our library currently only supports reading/writing tags, and does not support phone-to-shield communication, tag emulation (which requires an external 'secure element' only available from for NXP) or other more advanced features at this for time. NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range Bluetooth-compatible that doesn'for t require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC.Because it can read and write tags, you can for always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag (and of course all the other for NXP for MiFare type tags) The mini shield was designed by RF engineers using the best test equipment to create a layout and antenna with 5cm range, the maximum range possible using the 13.56MHz technology. You can easily attach the shield behind a plastic plate with standoffs and still read cards through a (non-metal) barrier. This shield is designed to use I2C or SPI communication protocols. SPI is the default, It is also easy to change the shield over to SPI where you can use any 4 digital pins by shorting two solder jumpers on the top of the PCB. for any "classic" NG, Diecimilla, Duemilanove, UNO - as well as Mega R3 or later. For using the I2C interface with Mega R2 or earlier, two wires must be soldered as the I2C pins are in a different location on earlier Megas. Size: See the picture No retail package Quantity: 1Pc Note: Due to the difference between different monitors, the picture may not reflect the actual colorof the item. Thank you!!!!
  • Fruugo ID: 193926677-413679911
  • EAN: 8469002394593

配送と返品

24時間以内に発送

  • EXPRESS: 無料 - 間の配達 木 18 12月 2025–月 29 12月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • Chengduhaibeishekejiyouxiangongsi
  • Chengduhaibeishekejiyouxiangongsi
  • Gaoxinqu Shengbangjie 899hao5dong 1lou109hao
  • Chengdu
  • China
  • 610095
  • YIN-ShunYI-f@outlook.com
  • 13123456789

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • CrossStYAting
  • E-CrossStu GmbH
  • 69 Mainzer Landstrasse
  • Frankfurt am Main
  • Germany
  • 60329
  • E-crossstu@web.de
  • +4969332967674