Car Door Protector 2pcs 5m Car Door Protector U-shape Edge Protectors Auto Door Seal For Car Door Rubber Anti-collision Protect (black) JiujiusoThe product is shipped based on the color or size of the main image of the product page.Car Door Protector- These door edge guards will protect your vehicle from nicks, chips and scratches, for most universal cars. 2PCS 5M long. Edge thickness: 2mm (0.78").Easy to install- Direct replacement. Just press the rubber seal above the place of installation. Attention Truck/Van owners, please make sure your door edge thickness before purchase.U-shape- U-channel design, easily fits on n any door edge and can be used on metal car door edge. Built-in steel belt, increase grip strength, not easy to fall off (not suitable for doors thicker than 2mm.)Advantages - Waterproof, insulator noise, corrosion resistance , high temperature resistance, wear resistance, anti-aging, UV resistance. Vehicle Door Edge Guard protects each door edge and helps maintain vehicle condition by preventing door dents and dents.Application- Ideal applications include uses as van doors and machine guards for computer cabinets, protective trim, upholstery trim, fender flare trim, door edge trim, automotive trim, decorative trim and much more.Easy to install1. Clean the edges of the door to remove oil, wax and dust. Before proceeding, make sure the door is dry.2. Peel the tape from the edge of the liner (be sure to stick the tape to the inside of the door) and peel the red tape about 2 inches from the tape.3. Starting at the top, insert the liner into the edge of the door until it is snug.4. Press the back panel with your thumb along the edge of the door to fully secure it, then remove the red tape.5. Repeat step 4 until all sides are protected.6. Use scissors to remove any unused coverings on the other edges of the door.7. The liner must be naturally dry and not wet for at least 12 hours.Quantity delivered: 2 pieces