High quality watch strap remover: sturdy metal alloy with 3 replacement pins. Watch strap repair kit. Suitable for most watch straps: professional tool with three spare pins, suitable for adjusting different straps. Useful tool: useful for replacing watch straps, watch repair, jewelry making. Ideal for installing and removing spring bars, you can easily adjust the watch band, remove the link pin and open the band. It will save the jeweler's time when you need to adjust or clean your watch band. Perfect tool for watch collectors How to use: Open and flatten the steel strip and place it on the groove of the moving belt of the detacher. Then gently push the belt groove to the appropriate position. Third, align the spring end of the rotating handle of the detacher with the pin on the steel strip. Finally, turn the handle directly by hand. Features: Newly purchased watches (steel bracelets) are more or less long; or the bracelets worn on the needles will also be elastic throughout the seasons. Going to a watch store to adjust it is time-consuming, labor-intensive and expensive. The watch disassembler is simple and practical, easy to use and understandable at a glance. It is your ideal choice! How to use: After screwing in the screw, place the bracelet into the belt release, align the pinhole of the bracelet and tighten until the bracelet pin falls out. Contents: < p>1 watch band removal tool. 3 pins. Color red Size: 65*14mm Weight: 26 g. Quantity delivered: 1 piece