説明
Clock Alarm Clock Electronic Led Wooden Standing Date Thermometer Hygrometer
Standing Clock Alarm Clock LED Date Hygrometer Thermometer LED clock with wooden appearance - kolor light brown ELEGANT, MINIMALIST AND MULTIFUNCTIONAL Beautiful appearance, fits do bedroom, room, office, kitchen - everywhere! :) DATE function THERMOMETER function HYGROMETER function (air humidity index in %) ALARM CLOCK function (remembers 3 different options) CLOCK function Possibility to set the response to sound (built-in sensor) 3 light intensity levels LED Various display options Dimensions (width/depth/height): 15,3 x 4,1 x 7,1cm Powered by a USB cable that is included This clock, as you can see at first glance, is a very stylish and tasteful element. It captivates with its simplicity, minimalism and at the same time modernity and elegance. It will easily fit into the selected home environment. Elegantly looks on the shelf in the bedroom, on the desk at work, in the youth room or kitchen environment. An invaluable advantage is the multitude of functions. The clock will show us the current temperature (Celsius or Fahrenheit), time (12h/24h) and date. There are 2 display options Do choose from - option 1: time and temperature and humidity or option 2: time and temperature and humidity alternating with date. In the morning getting up will help us alarm clock function (the ability to remember up to 3). We can also easily choose display brightness (3 levels). Thanks to the we equipped built-in battery, the clock remembers the time even after disconnecting the power source, thanks to which it will show the current date and time at the next start-up. Charging Connector: 5V Input Set: Clock, USB cable, manual, box Dimensions: 15,3 x 4,1 x 7,1cm hygrometer function: The clock continuously examines the humidity in our environment and displays this value on an ongoing basis next to the temperature. The advantage of the presented model is the sound sensor. The clock can be adjusted to respond (turn on) to clapping. DIMENSIONS Each set has a cable with USB input do power supply (possibility of plugging do socket using a charger) and instructions in which each function is described and its use Choose as a prezent for yourself and others :) ___________________________________________________________________________________________________________ INSTRUCTIONS FOR USE IMPORTANT! Preliminary information - we recommend powering the LED clock only za using a USB power cable, despite the fact that there is room for battery power, which is, however, very inefficient in this device. When powered by batteries or accumulators, we recommend reducing the display brightness level to the lowest L3 (below in the manual) and setting the Power-Saving Mode function (i.e. response to sound). In this configuration, we can extend the battery life the most. In case of poor battery quality or low charge, the clock may blink, lose brightness or turn off. This clock is not damaged. Its operation is based on many simultaneously running LED diodes, whose demand is much greater than ordinary clocks. For this reason, the clock should be used on cable power, and battery power should be used as "emergency". - Please do not use the clock in humid, extreme and dramatically changing temperatures and trembling places. - We can clean with a dry or slightly damp cloth. Settings and buttons: "SET" longer hold In order to set the current date, time, zone 12/24H and alarms, press and hold the "SET" button on the back of the clock until do of the sound signal. To change individual values next to it we have buttons "UP" (do top) and DOWN (do bottom). To go do of the next setting/approve and go do of the next one click "SET". Order: YEAR -> MONTH -DAY ->ZONE 12H/24H -> CURRENT TIME ->ALARM 1 (oN - active,- - inactive) ->ALARM TIME 1 -> ALARM 2 (oN - active,-- inactive) ->ALARM HOUR 2 -> ALARM 3 (oN - active,- - inactive) -> ALARM HOUR 3 "SET" click In order to change the form of display, click the "SET" button at once. The "dP - 1" option displays the current time and temperature alternately with the current date (year, month, day). The "dp - 2" option displays the time of the hour together with the temperature. "UP" longer hold By pressing the "UP" button longer, we enter do display brightness settings. Do choose we have 3 levels (as usual changeable by UP and DOWN buttons) - L3 darkest, L2 moderately, L1 brightest. "UP" click By briefly clicking the "UP" button, we change the way the temperature is displayed - Celsius or Fahrenheit. "DOWN" click The "DOWN" button ma only one function - response to sound (otherwise energy saving mode). The "oN:Sd" option triggers a response to sound, that is, the clock turns off after some time and can be woken up with a clap or button. Setting "- -:Sd" disables the sound function.
-
Fruugo ID:
390763986-836990039
-
EAN:
9114577631053