説明
Motorcycle Body Parts
Easy to install
It includesdouble tape method, no modification needed.And it wont damage the original paint.Sold in pairs.
No modifications or trimming required. You just need take off your stock air deflector and keep your stock nuts aside,then install new fairing side covers.
-When air flows around a moving object, it must accelerate because the flow path around the object is longer than its length. For winglets, this accelerated flow around the curved nose of the fairing is an excellent choice because the potential for generating lift increases in the square of the airspeed.
-It seems that the new concept is being applied to the downforce problem, that is, the vortex lift problem. In aircraft such as the F-16, the rapidly rotating vortex flows from the forward extension of the wing (called glove blades) back and forth on the wing. Such a vortex has a very low pressure at its core (a tornado is just a dangerous natural vortex). By reducing the pressure above the wing, it can be roughly doubled at a high angle of attack (for example, 30 degrees). This lift is not free, it requires power to push the angled wings and vortex system into the air.
-Safety considerations limited the length of the winglet, so designers increased the number of airfoils to form stacked stacked airfoils, all of which generate downforce by deflecting the maximum possible air upward.
-
Fruugo ID:
289921655-647225515
-
EAN:
8802672253089
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
important Safety Instructions Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction. General Warnings Intended Use: Use this product only for its intended purpose as described in the user manual. Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision. Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged. Usage Precautions Environment: Do not use in wet, damp, or flammable environments unless specified as safe for such conditions. Proper Operation: Follow all operating instructions carefully. Avoid improper handling or misuse. Power Source: Use only the recommended power supply or batteries. Do not exceed specified voltage or current ratings. Maintenance and Care Cleaning: Disconnect from power before cleaning. Use only manufacturer-recommended cleaning methods and solutions. Storage: Store in a cool, dry place away from direct sunlight and extreme temperatures. Repairs: Do not attempt to disassemble or repair the product. Contact authorized service personnel for assistance. Specific Warnings Avoid Hazards: Keep the product away from sharp objects, water, and heat sources. In Case of Malfunction: If the product malfunctions or exhibits unusual behavior, discontinue use immediately and contact customer support. Disposal Instructions Recycling: Dispose of the product in accordance with local electronic waste disposal and recycling guidelines. Battery Disposal: Follow specific regulations for the safe disposal of batteries if included.