1. Use: Embroidery 2. Type: Wooden embroidery hoop - It is lightweight and durable. - Each hoop has a comfortable feel after being sanded. - It is suitable for hand - embroidery (ribbon embroidery, wool embroidery, candlewick embroidery, etc.). 3. Usage method: - Step 1: Loosen the outer screw, lay the inner hoop flat, place the fabric on the hoop, and then put the outer hoop over the inner hoop. - Step 2: Smooth out the fabric and tighten the screw. - Step 3: Continue to smooth out the fabric until there are no wrinkles. Make sure that both the warp and weft of the fabric are vertical, and finally tighten the screw. - Step 4: Check if the hoop is tight enough. The way to check the tightness is to pass a threaded needle through the fabric surface. If there is a "popping" sound when pulling the thread, it is acceptable. 4. Dimensions: - The diameter is about 17 cm. - The hoop width is about 3/8 inch. 5. Color: Wood color 6. Material: Bamboo 7. Package contents: - There are 12 embroidery wreathes in the package. - Only the above - mentioned items are included in the package, and other items are not. 8. Note: - Light and different displays may cause the color of the item to vary slightly from the actual product. - The measurement error is allowed to be around ±1 - 3 cm.