Features: 1. If you are tired of water in the bathroom and kitchen, install this water retaining strip to help prevent water from flowing out. 2. The long, flexible design allows for various shapes and configurations. 3. The shower barrier and retention system helps keep water inside the threshold. 4. Ideal for curbless showers and other areas where water containment is needed. 5. This product features a self-adhesive backing for easy installation and sits close to the ground to help prevent water leakage. Important Notice before applying Water Barrier Strip: 1. The back of the Water Barrier Strip has adhesive for temporary assistance only. To properly secure and seal the strip, silicone sealant (glass glue) must be applied to both sides and ends of the strip. 2. Clean and dry the surface thoroughly before application. Ensure all dust and moisture are removed. 3. Determine the desired placement and mark the position with a pen. 4. Peel off the protective liner from the adhesive backing and place the strip along the marked line. 5. Apply silicone sealant (sealing glue) to seal the connection between the wall and the strip. 6. For best results, apply silicone sealant to both sides of the strip and allow it to cure for approximately 24 hours. Note: - Actual color may vary slightly due to differences in monitor displays and lighting conditions. - Allow 13 cm variation due to manual measurement. Specification: Type: Water Barrier Strip Material: Silicone, self-adhesive Size: Width 1.6 cm, Height 3.0 cm Length: 0.5 / 1.2 / 1.5 / 1.8 / 2 / 2.5 / 3 meters (optional) Package includes: 1 x Water Barrier Strip