1HIGH DURABILITY: 3D printer flex build plate is easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Possess good erossion resistance and prevent rust. Brushed surface provide better adhesion, ensure a perfect print 2APPLICABLE MODEL: The resin spring plate is 176x105mm in size and is suitable for models such as for CREALITY HalotOne Plus, useful and practical 3CLEVER DESIGN: The magnetic printing platform is equipped with a handle that make it easy to install and remove the magnetic printing platform, very convenient 4EASY TO OPERATE: Traditional DLP light curing printer platforms must use tools to disassemble, while this resin flexible board can be disassembled by bending 5INSTALLATION METHOD: Thoroughly clean and dry the printing platform plate, attach the magnet to the printing platform plate and let it sit for a while to fully seat, install the spring steel plate on the magnetic base again, and finally reset and level the printer. Set to start printing. It is recommended to print (A4) 3.8mm thick spacers to facilitate the normal zeroing of the Z axes 1 x Print Bed 1 x Magnetic Base