Features: * Material: PP Resin * Size: 36x36cm * Creates a stone block effect * Adds an exotic touch to garden paths, allowing for personalized style. * Color: Black * DIY mold for casting plastic stones, popular in Europe and America. How to Use: Step 1: Mix cement and water according to package instructions. The consistency should resemble oatmeal and be thick enough to hold an edge when cut with a spade. Step 2: Fill the mold with concrete, using a spade to ensure all areas are filled. Step 3: Using rubber gloves, spread the concrete evenly, filling any gaps or low points. Tap the mold to remove air bubbles. Step 4: Following the mold's contours, smooth the concrete and wipe away excess. Step 5: Allow the concrete to set for up to five minutes, then carefully remove the mold. For the next section, rotate the mold a quarter turn and place it next to the finished paver, angling it slightly for curved paths. Step 6: Once the concrete has hardened overnight, fill cracks with dirt and wash away excess. Water the ground around the new pavers to help them settle. Package Contents: * 1 x Concrete Paver Mold