LED light curing machine adopts the light-emitting diodes Blue-ray, it can cure the resin with the wavelength of 420-480nm, and be used to repair the teeth in the department of stomatology.There are three solidification working light modes: strong light mode, flashing light mode, gradual light mode.The light-emitting diodes has, which can greatly reduce the costs of maintenance of the machine; does not any heat when running, so no need to cool it with fan, thus, it is free from the annoyance of noise and vibration of machines.The high capacity lithium battery can last about 130-200 after being fully (4-8 hours).Intelligent battery detection circuit function: when battery is low, it will alarm and the light will flash.Lightweight and two-stage design, first low-light irradiation, and then rapid curing.This can inhibit the excessive contraction of the resin surface, avoid cracks between cavities edge.Plug Type: EU PlugBattery (rechargeable): lithium batteryBattery capacity: 2200mAhBattery: 3.7VCuring time and depth: 5s/3mmBlue light wavelength: 420-480nmBlue light intensity: 1200-200mw/cmColour: blackMaterial: plasticPackage Contents:1 x Curing Light set