modname=ckeditor modname=ckeditor Description Use range:Occlusal flat panel for the production of complete denture determination of occlusal plane position. Made of stainless steel and they are autoclaved under the high temperature of 135C and the pressure of 0.22Mpa. The front of the occlusal flat panel is required to be approximately 2 mm below the lower lip and parallel to the line of sight. In order to facilitate the observation, and the line of sight on the line of sight, so that the plane of the occlusal plane parallel to the line of sight. Smooth finished edges for patient comfort provides a precise easy method to establish patient's vertical dimenstion and occlusal plane. Storage condition: Stored in the relative temperature of not more than 80%, non-corrosive gas well-ventilated indoor Packing include : 1 set Jaw Fox Plane Plate Note:This product may be intended for use by a health care professional use only. The seller may ask you to evidence you are a qualified health care professional entitled to buy and use such products in your country.