Item Type: Water Faucet Material: Stainless Steel Weight: Approx. 435g/15.3oz Size: Approx. 142 x 120mm/5.6 x 4.7in Inlet Size: G1/2 Male Thread Hose Interface Diameter: Approx. 15mm/0.6in Installation Method: 1. Cut off the water supply pipeline. 2. Put the decorative cover into the water inlet pipe, and apply a circle of putty on the edge of the back of the decoration. 3. Wrap the water inlet pipe with sealing tape or apply sealing paste, install the faucet on the water supply pipe, and tighten it with a ribbon wrench. 4. The water outlet is in the direction that is convenient for connecting the hose, and the decorative cover is tightly pressed against the wall to remove excess putty.1Stainless steel faucet, resistant to acid and alkali, not easy to corrode, and will not pollute the tap water source. 2High hardness, good toughness, the surface will never rust, deform and corrode, and can be used outdoors for a long time. 3Easy to install and convenient to use, no complicated tools required, save time and effort. 4Wide range of applications, can be used in gardens, washing machines, bathrooms, and kitchens. 5Exquisite workmanship, smooth surface, adds a touch of class to your kitchen and easier to clean. 1 x Water Faucet 1 x Accessory