1、Non‑overflow drainage components, suitable for bathroom and kitchen wash basins. 2、The polished brass finish is highly lustrous and can resist daily scratches and corrosion. 3、This product uses premium brass, and the tail pipe is made of stainless steel to ensure good quality. 4、With hardware and soft silicone gasket, please make sure the gasket is in the correct position to avoid leakage. 5、Easy to install and remove, smooth drainage, durable and long service life. 1 x Sink Drain1 x Protective Cover Item Type: Sink DrainMaterial: Brass, Stainless SteelColor: GoldProcess Treatment: ElectroplatingDrain Hole Diameter: 3cm / 1.2inForm: British SewerType: FlapWeight: Approx. 230g-236g / 8.1oz- 8.3ozSize: Approx. 19x6cm / 7.5x 2.4inInstallation 1. Take out the head of the drainer first, and gently put it into the sink drain hole 2. After leveling and volume, as shown in the figure above 3. Then put the ring pad at the bottom, screw on the fixing nut, and tighten it with a wrench 4. After fixing the drainer as shown above, the drain installation is complete, just connect the upper and lower water pipes