1The power cord is made of copper wire + PVC sheath, which is resistant to high temperature and oxidation, and does not become soft after working for a long time. The power cord of copper wire has a large load and stable current. 2The stainless steel heating tube heats up quickly, with high power, fast water boiling rate, high heating efficiency, and small bucket of water heating takes less time, which can meet the hot water demand in daily life. 3Intelligent temperature control design, good antiscalding and quickheating effect, the water is turned off when it is turned on, to prevent excessive boiling, antiscalding, automatic poweroff, really no rust. 4The outside of the heating tube adopts a stainless steel protective cover, the heating tube is not exposed, and there is no worry that the product will heat up and burn the human body or the container. 5Put the device in the water and power it on to help you heat the water. Completely immersed in the water will improve the heating efficiency, easy to operate, and convenient to carry. Item Type: Boiling Water Stick Material: ABS+Stainless Steel Gross Weight: Approx. 409g/14.4oz Rated Voltage: 110V (US Plug) Rated Frequency: 50Hz Rated Power: 1500W Heating Temperature: Maximum 80, Automatic Power-Off Power Cord Length: Approx. 1.3m/4.3ft 1 x Boiling Water Stick 1 x Manual 1. The equipment must be completely immersed in water before it can be powered on;2. Put it in the water and heat it and cut off the power for 30 seconds, then take it out of the water.