Temperature and Pressure Safety Valves (T/P Valves) 0.7 MPa = 102 PSI Detailed Introduction: Temperature and pressure relief valves are suitable for use with various water heaters, including solar, electric, heat pump, and boiler systems. The valve automatically releases excess temperature and pressure, providing dual safety protection. It serves as a critical safety component for pressurized water heating systems. Features: Safety relief valves are commonly used to regulate pressure in heating system boilers, domestic hot water storage tanks, and general water systems. When the system reaches the calibrated pressure, the valve opens to release pressure to the atmosphere, preventing damage to system components and ensuring safe operation. Calibration Pressure: 0.1, 0.15, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 MPa Deviation: Up to 0.5 MPa, deviation is ±0.015 MPa; above 0.5 MPa, deviation is ±3% of the set pressure Technical Specifications: Color: Gold Material: - Body: 3/4 inch brass - Control spindle: brass - Sealing gasket: silicone gel - Spring: SUS304 stainless steel Nominal Pressure: PN10 Temperature Range: 5–110°C Set Pressure: 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 MPa Set Pressure Deviation: -10% to +5% of set pressure Set Temperature: 99°C Inlet and Outlet (middle): BSPP 3/4" x 3/4" Weight: 238g Dimensions: 83 x 42mm Package Included: 1 x Pressure Valve Note: Light reflection and differences in display screens may cause slight variations in color between the product image and the actual item. Measurement error allowance is ±1–3 cm.