Feature:1. EXCELLENT SENSOR: The cable type sensor adopts advanced temperature and humidity sensors as its core components, ensuring high reliability and excellent long term stability.2. I2C OUTPUT: This temperature and humidity sensor probe outputs calibrated digital signals in standard I2C format, IIC serial interface is easy to integrate.3. STAINLESS STEEL SHELL: The shell of this temperature humidity sensor is made of 304 stainless steel, which is IP67 waterproof, and has great corrosion resistance.4. LIGHT AND COMPACT: The temperature and humidity sensor probe has a small volume and light weight, making it easy to carry and install without occupying too much space.5. STRONG PRACTICABILITY: Sensor probe can be used for machine room monitoring, HVAC, weather station, warehouse, construction site, concrete test block detection, agricultural greenhouse, flowers, nursery and soil.Specification:Item Type: Temperature Humidity Sensor ProbeMaterial: 304 Stainless Steel Shell, PlasticShell: IP67 WaterproofModel: FS304 SHT41Working Current: andlt 10mAHumidity Accuracy: 2 percent RHTemperature accuracy: 0.2Working Voltage: 3.3VTemperature Measurement Range: -20 to 100Humidity Measurement Range: 0-100 percent RHCommunication Interface: ICWorking Conditions: -40 to 125, 0-99 percent RHStorage Conditions: -20 to 80, 0-95 percent RHCable Length: Approx. 150cm or 59.1in.Package List:1 x Temperature Humidity Sensor ProbeNote:Note:The relative humidity of air is function of temperature, air temperature has a great impact on relative humidity, various compounds such as acids, alkalis, and salts have a significant impact on the physical properties of water steam. The following precautions should be taken when using:1. The temperature and humidity sensor should be installed in a place where the temperature is relatively stable and can best represent the measured ambient temperature and humidity.2. Avoid installing in places with drastic temperature changes.3. Avoid installing in areas with intense air flow.4. Avoid installing in dead corners where air does not flow.5. Avoid using in salt spray environments.6. Avoid using in corrosive gas environments.Working Conditions:The sensor performs normally within the recommended operating range. Long term exposure to conditions outside the normal range, especially when humidity exceeds 80 percent , may cause temporary signal drift (drift and3 percent RH after 60 hours). After returning to normal operating conditions, the sensor will slowly self recover to the calibration state. Prolonged use under abnormal conditions will accelerate the aging of the product.