Humidity Temperature Controller Digital Thermometer Hygrometer Control Module Dual Output LCD Autom

¥2,899
+ 配送料¥1,949

Humidity Temperature Controller Digital Thermometer Hygrometer Control Module Dual Output LCD Autom

  • ブランド: Unbranded

Humidity Temperature Controller Digital Thermometer Hygrometer Control Module Dual Output LCD Autom

  • ブランド: Unbranded
希望小売価格: ¥3,549
価格: ¥2,899
得する金額: ¥650 (18%)
販売元:
¥2,899
+ 配送料¥1,949

在庫あり

以下の支払い方法を利用することができます

説明

Temperature function:1. Automatic recognition of working mode 2. Cooling 3. Heating 4. Temperature correction function; Humidity function:1. Automatic recognition of working mode 2. Dehumidifying 3. Humidifying 4. Humidity correction function Remotely reading/setting of parameters ,Real-time reporting of temperature/humidity ,Relay enable function (enabled by default) Set Parameter:1. Working Mode:The system automatically recognizes the working mode according to the starting/stopping temperature and the starting/stopping humidity. 2. How to set the starting/stopping temperature function?Hold press the "TM+"/ "TM-" button for more than 3 seconds to enter the startup/stop temperature setting interface. The parameters can be changed by the "TM+" and "TM-" buttons. After the parameters are changed, wait for 6s and it will automatically save and exit. 3. How to set the starting/stopping humidity function?Hold press the "RH+"/"RH-" button for more than 3 seconds to set the minimum/maximum value of humidity. The parameters can be changed by "RH+" and "RH-" buttons. After the parameters are changed, wait for 6s and it will automatically save and exit. Model Number:XY-TR01 Style:Embedded Max Measuring Temperature:50C - 69C Display Size:1.9 Inches & Under :Temperature Controller Display Type:Digital Type:K Usage:Industrial Screw:1/4 inch Power Type:Charger Temperature range:-20 -60 Celsius Humidity range:00% -100%RH Control accuracy:0.1 Celsius, 0.1%RH Detection probe:integrated sensor Output type:relay output Output capacity:maximum 10A Usage: Step 1:Connect sensor to controller :Connect to power supply to controller Step 3:Adjust Start Temperature,Stop temperature and Temperature Correction Step 4:Adjust Start Humidity,Stop Humidity and midity Correction Step 5:Enable relay output according requirement; Step 6:Remove power supply Step 7:Connect to load with power supply at relay output terminal if need at Step5 Step 8:Connect to power supply for controller again Step 9:Test and working colour:blue Material:Plastic + metal Size:57*60*20mm Package Contents: 1 * Humidity and Temperature Controller with SHT20 Sensor Probe Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • ブランド: Unbranded
  • カテゴリー: 湿度計
  • 色: blue
  • Fruugo ID: 347560778-759386436
  • EAN: 7306072336898

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark

配送と返品

3日間以内に発送

  • STANDARD: ¥1,949 - 間の配達 火 07 10月 2025–火 14 10月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る