Mini OBD2 Wifi Scanner for Multi- CAN-BUS as same as Wifi. Top 5 Reasons To Get Mini OBD2 Wifi Scanner:1. Software Version: V2.1 (depending on software).2. Hardware Version: V1.5.3. Works with all OBD-II compliant vehicles.4. Wireless (Wifi).5. Support Four operating platforms (IOS, Android, Symbian, Windows) Compatible systems:Software support platform: Windows XP, Windows 7/8, IOS, Android, Symbian.Compatible software:Window: ScanMaster-, .net, PCMSCAN , etc.IOS: Auto Doctor, Mini OBDII Android: Torque, DashCommand, OBD Car Doctor, Auto Doctor, Mini OBD, EOBD, etc.Symbian: OBDScope SSID: WiFi_OBDIIIP: 192.168.0.10Port: 35000Communication: WIFIMaster Chip: Working Voltage: 9v ~ 16vWorking Current: 65mAStandby Current: 45mAOperating temperature: -40 ~ 85 Working Humidity: less than 60% Supported protocols: 1.SAE J1850 PWM (41.6Kbaud) 2.SAE J1850 VPW (10.4Kbaud) 3.ISO9141-2 (5 baud init, 10.4 Kbaud) 4.ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5.ISO14230-4 KWP (fast init, 10.4 Kbaud) 6.ISO15765-4 CAN (11bit ID, 500 Kbaud) 7.ISO15765-4 CAN (29bit ID, 500 Kbaud) 8.ISO15765-4 CAN (11bit ID, 250 Kbaud) 9.ISO15765-4 CAN (29bit ID, 250 Kbaud) Mini OBD2 Wifi Scanner Functions: 1: Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). 2: Clear trouble codes and turn off the ("Check Engine" light) 3: Display current sensor data 4: Engine RPM 5: Calculated Load Value 6: Coolant Temperature 7: Fuel System Status 8: Vehicle Speed 9: Short Term Fuel Trim 10: Long Term Fuel Trim 11: Intake Manifold Pressure 12: Timing Advance 13: Intake Air Temperature 14: Air Flow Rate 15: Absolute Throttle Position 16: Oxygen sensor voltages / associated short term fuel trims 17: Fuel System status 18: Fuel Pressure 19: Many others colour:black Material:Plastic + chip Size: 45mm * 25mm * 75mm Package Contents: 1 * Mini OBD2 Wifi Scanner 1 * Box Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.