BERM Electronic Digital Display Counter Panel Industrial Inductive Counting Tool JDM11‑6HAC110V Item Type: Electronic Digital Display Counter Product Model: BEM-6H-05N-CT Counter Model: JDM11-6H Power Consumption: ≤10W Counting Range: 1-999999 Counting Speed: 10 times/s Working Method: Continuous working system Counting Method: Contact count, level count and sensor count Operating Temperature: -5℃-45℃ Storage Temperature: -20℃-70℃ Reset Time: ≥0.5s Power Restart: ≥1s Sensing Distance: Approx. 5mm / 0.2in Detection Object: Metal (Iron ST37) Reset Method: Panel reset Counting Error: ≤1 Data Retention: ≥10 years Power Cord Length: Approx. 1.5m / 4.9ft Sensor Cable Length: Approx. 1.5m / 4.9ft Application: Widely used in petroleum, chemical, textile, machinery, mining, national defense, agriculture, food, printing and other industries; but for the control of valuable equipment or the situations where the product is damaged and safety is endangered, please do a secondary protection. Working Principle: The sensing distance is 5mm. When a metal (iron ST37) object passes through the sensor, it starts counting. How e: The contact input should be reliable to avoid malfunction caused by contact bounce. Reset Function: Press the panel reset button at any time. The counter returns to the initial state, and the reset time is ≥0.5 seconds The maximum speed of the calculator is the maximum speed when the duty ratio is 1: 1, and the pulse width of on or off is greater than 50 milliseconds. In the control system, the counter control line is wired separately from other power lines; in a strong current environment and the counting terminal wire is long, please use a shielded wire.