Features: Using 99.95% oxygen resistant copper conductors, it effectively reduces resistance and signal attenuation, and improves high-frequency detail and low-frequency dynamic performances by 30%. Both the 6.35mm male head and mono male head coated with a 3 μ m gold layer, which increases the oxidation resistant performances by 5 times and have a plugs-in life of over 2000 times. The 90 ° right angle elbow is suitable for narrow space at the back of the equipment to avoid wire bending and breakage. The interfaces is reinforced with a spring sleeve to prevent pulling. Supports both mono and (TRS) connection method, suitable for professional equipment such as guitar, and electric guitars. Aluminum foil+braided copper mesh+conductive layer composite shielding structure, with a signal-to-noises ratio of 110dB, effectively isolating electromagnetic interferences Specifications: Component:Copper Type:Single Channel, Double Channel Length:Approx.30cm/11.81'' Package Includes: 1Piece mono to 1/4inch Cable note: Please allow 1mm errors due to manual measurement. Due to the differences between different monitors, the picture may not reflect the actual color.