説明
Feature:
1. [HIGH EFFICIENCY] Our induction heater uses electromagnetic fields to heat, which is faster, more accurate and efficient. There is no open flame caused by heating, ensuring your safety.
2. [LED LIGHT] The end of this heater is designed with LED light, which can provides lighting when working in the dark, you can clearer understand the work progress and the status of heated objects.
3. [6 COILS] Including 1 x 0.79in (dia20mm), 1 x 0.98in (dia25mm), 1 x 1.18in (dia30mm), 1 x 1.38in (dia35mm), 1 x 1.57in (dia40mm), 1 x free coils with a length of 29.53in (750mm), can adapt to various work needs.
4. [3mm BRASS CORE] The coil adopts 3mm brass core, more reliable, can be heated up to 800℃ for a long time, with good energy saving effect that can achieve over 30%.
5. [OVERHEAT PROTECTION] Equipped with cooling fan and overheating protection, our induction heater can heat without damaging nearby thermal sensors, extends the service life.
6. [WIDELY APPLICABLE] The magnetic induction heater is mainly used to heat nuts and rusty screws, suitable for automobiles, machinery, and various small metal parts such as gears, pulleys, bearings, etc.
Specification:
Item Type: Magnetic Induction Heater Kit
Material: Flame retardant ABS, brass
Model: FH 1500
Energy Saving Effect: Energy saving can achieve over 30%
Working Frequency: 50-60Hz
Rated Power: 1500W
Heating Temperature: 800℃
Time Required for Heating at 800℃: 5-30 seconds (the larger the object, the longer the time required)
Heating Bolt Diameter: The coil can be wrapped and adjusted freely
Ambient Temperature: -40℃ to 60℃
Relative Humidity: <95% RH
Atmospheric Pressure: 86KPa to 100KPa
Function:
1. With soft start function, long service life in case of frequent starts
2. With IGBT overcurrent protection function
3. With input and output overcurrent protection, automatic adjustment, negative feedback function
4. With IGBT over temperature protection function
5. With heating coil short circuit protection function
6. With heating coil open circuit protection function
7. Full bridge series resonant circuit topology, strong anti interference ability
8. Using high performance IGBT driver chip, accurate drive and output waveforms
9. Automatic identification of load and phase locked function to achieve high power factor at the load end, and to enable circuit control to work efficiently in weak inductive areas
10. Several electromagnetic heating controllers are installed in parallel on the same heating tube without interfering with each other
11. Good power saving effect: Compared with the currently used electric heating coils, the power saving can achieve over 30%
12. Easy installation: can be connected to induction coils with bucket and flat plate structures, etc.
.
Package List:
1 x Magnetic Induction Heater6 x Heating Coil2 x Screw1 x Storage Box1 x User Manual
-
Fruugo ID:
392303360-839353435
-
EAN:
7590917158947
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
Warning: Please read the product instructions carefully before use to ensure correct use.
シリアルナンバー:
7590917158947