Item Type: Wheelchair Battery Charger Material: ABS Voltage: 115/230V (adjustable voltage) Output Voltage: 24V DC Current: 6A Usage: (1) Remove the battery from the original device. (2) Confirm that the battery cable and connector of the power cord are in normal working condition. (3) Confirm that the output voltage of the charger is compatible with the voltage of the connected battery. (4) First connect the battery to the connector on the charger, and then connect the power supply. (5) After confirming that the AC voltage of the socket is consistent with the voltage selected by the charger, connect the power cord to the charger and then plug it into the socket.Generally speaking, when the power cord is plugged in, the power indicator (red light) will light up, indicating that the power is on. (6) At the beginning of charging, the charging status indicator will display an orange light when charging, and it will turn to a green light when charging is completed. Package List 1 x Charger 1 x Power Cable 1 x Manual 1Suitable for any vehicle or scooter using battery 24V system, a wide range of applications to meet your needs. 2With the output short circuit protection function that will not damage the power supply, with 115/230V adjustable voltage. 3After removing the output short circuit, the power supply can still output normally, reliable and durable use. 4With soft start function, can withstand frequent switch start, and will not damage the power supply, good heat dissipation performance. 5A good replacement for an old or broken motorcycle charger, easy and convenient to install and remove.