Pneumatic Car Brake Fluid Bleeder Bleeding Tool Brake Oil Replacement Kit ,1L Product Overview: Pneumatic Brake Fluid Bleeder Tool Pneumatic Brake Fluid Bleeder w/ 4 master cylinder adapters 90 - 120 PSI Brake fluid bleeder works with your compressor to quickly assist in your brake bleeding. The of this tool allows brake bleeding to get done by person easily. Flush and refill the entire brake system by yourself with this brake fluid bleeder. Convenient -person operation Flush and refill entire brake system 34 Brake Fluid Tank 24 New Fluid tank that inserts into your master cylinder with provided adapters Use DOT certified brake fluid Hose Length 1-1/12 ft. Master Cylinder Reservoir Adapters : 1. INCHES.-1.60 INCHES (32 to 41mm) 1.10 INCHES.-1.45 INCHES (28 to 37mm) 0.95 INCHES.-1. INCHES (24 to 32mm) 0.80 INCHES.-1.20 INCHES (21 to 30mm) Specification: requirement: 90 to 120 PSI/6-12Bar, inlet: 1/4'- 18 consumption: 180ltr/min Negative pressure: 60% Oil extraction container capacity: 1L approx. Refill container capacity: 0.75L approx. Refill container material: copper hose size: 2m approx. How to use: Take away the dirty brake fluid from the tank; Put in the new fluid back; Start the car and connect the hose between the equipment and the brake branch pump; the screw to be loose, but not completely. Then open to start siphoning the fluid out.Please turn off the screwing when it finish. Our tool fit for universal cars, you can use the tapered spout which is offered in the package avoid leaking; Please lift the tool over the brake pump to ensure it work properly. Package List: 2 x Brake Fluid Change Tool 2 Adapters 4 x Plastic Adapter 1 x Hose