1、The adhesive tape made of PTFE is extensible and elastic, and can always maintain the original softness. 2、Can withstand a high temperature of 300℃ and has better anti‑aging performance. It is not easy to crack when pasted on the exterior of the object. 3、Not easy to adhere to any substance, and it is easy to clean all kinds of oil stains, stains or other attachments attached to its exterior. 4、The thickness is moderate, and it can be very firm without winding multiple layers during use. 5、Commonly used for thermoplastic demoulding, packaging and sealing operations in the electronics and industrial manufacturing industries Item Type: Heat Resistant TapeMaterial: PTFESpecification:Thickness: Approx. 0.18mm / 0.01in; Width: Approx. 13mm / 0.51in; Length: Approx. 10m / 32.8ftThickness: Approx. 0.18mm / 0.01in; Width: Approx. 19mm / 0.7in; Length: Approx. 10m / 32.8ftThickness: Approx. 0.18mm / 0.01in; Width: Approx. 25mm / 1in; Length: Approx. 10m / 32.8ftThickness: Approx. 0.18mm / 0.01in; Width: Approx. 50mm / 2in; Length: Approx. 10m / 32.8ftDescription: PTFE tape roll with adhesive backing. It is suitable for almost all vacuum sealing machines, as well as most types of hand/pulse heat sealing machines to replace deteriorated or burnt tape, which is an important barrier between the heating element and the bag. Old tape will cause poor sealing of the bag and may cause damage to the heating element and damage to the sealer. Just peel the tape from the roll and place it on the correct area (you need to clean the sticking position before placing the new tape). Above the wire of the vacuum sealing machine, below the wire of the pulse sealing machine