Function: These pins allow you to repair tilt steering column issues related to vertical steering wheel movement. This pin helps reduce excessive tilt steering column looseness. The oversize pin provides a reliable solution and is an easy alternative to replacing the steering column housing. Install: The pin is easy to install. Drop the steering column by removing the two fasteners with 15 mm heads. Remove the plastic cover over the base of the turn signal stalk to access the pin. Remove the existing pin by inserting a screw into the threaded hole and pulling while gently moving the steering wheel to the left and down to release pressure. Insert the oversize pin. Compatible with: - 1969–1996 Corvettes - 1967–2002 Camaros - 1969–1999 passenger cars, trucks, and Suburbans - Many 1969–1992 steering columns - Many 1969–1999 applications for cars and trucks - 1969–2002 cars and trucks equipped with a Saginaw tilt steering column Color: As shown Material: Metal Note: Installation guide is not included. Professional installation is strongly recommended. Please verify compatibility to ensure this item meets your needs. Due to different product batches, appearance may vary slightly but does not affect functionality. Package Contents: 2 × Steering Column Pins Note: Light reflection and differences in display screens may cause slight color variations between the image and the actual item. Measurement may vary by +/- 1–3 cm.