Automatically sense the liquid without pressing: the sensing distance is about 5CM, and the liquid can be discharged quickly in 0.26 seconds Reasonable quantitative discharge: 1ML quantitative discharge, the second discharge after 2 seconds interval Full body waterproof design: IPX6 waterproof design, body washable, suitable for bathroom and kitchen - mouth design: - liquid filling port, replenishing liquid at any time, adding liquid is easy Suitable for a of washing liquids: quick and easy to change liquid, suitable for different washing liquids. Capacity: 200ml Rated voltage: DC 6V Power supply mode: 4*AAA battery (not included) Important Note: 1. 4xAAA battery is required for the soap dispenser. When installing, check "+" and "-" symbols of battery and soap dispenser to install correctly 2. If the soap dispenser cannot dispense the soap properly, poke the nozzle of the soap dispenser by hand, so that the internal straw can contact with the air to dispense the soap 3. The first time you use it, you need to sense the soap dispenser 2 or 3 to fill the straw with soap Cautions: 1.If the soap cannot be dispensed properly, poke the nozzle of the soap dispenser by hand. 2.When the liquid level is low, liquid. Otherwise the dispenser will not pump out any liquid. 3.When light is flashing, it means battery low. change the batteries. 4. do NOT shake the devices to avoid any serious damage. 5. take out the battery if long time no use. 6. make the liquid cover is mounted. Otherwise the liquid will come out. 7.This devices is design for bathroom and kitchen. 8.Normal working temperature is 3-40 size:70 x 94 x 188mm Material:ABS+PC colour:black Package Contents: 1 x Soap Dispenser 1 x Manual Only the above package content, other are not included. Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed is +/- 1-3cm.