Features: 1. Induction heaters are key equipment for all forms of induction heating.2. The inductor is a hand-held inductor with an anti-slip ergonomic casing. Faster and safer than traditional torches.3. The incidental damage normally associated with the torch can also be eliminated.4. There are bright LED lights to illuminate your workload.Application:1. Preheating into attached or rusted fasteners and parts that require separation2. Straighten small hail and other similar dents, do not paint the lacquer without damaging the car, and remove the peel on the car body parts when restoring or straightening.3. Burn the mute block and press the gear or other machinery and equipment on the beam.4. Heat treatment of metal parts, hardening, tempering, normalizing.5. Press the bearing on the hot landing and the fluidity.6. Snyatie is a small laminated glass sealant for metal.7. Remove glue coated metal spoiler, mold, sticker.8. Heat the cover or other vinyl surface to be coated.9. Remove rust from metal and body by high-speed heating parts and peel off rust.10. Remove the paint coating on the metal surface or on the body.Safety Code:1. Please read the manual carefully before use.2. Keep the work area clean.3. Don't overuse, always maintain the proper foundation and balance, and the proper foundation and balance can be better controlled.4. Do not use it in a damp environment or immerse it in water to avoid electric shock and machine damage.Specifications:Plug: UK plugVoltage: 220VWattage: 1000WWorking frequency: 6000HZOperating Temperature: -40 C ~ 60 CRelative Humidity: