DescriptionInstructions:1. The basic process: First with the attached 320 # water sandpaperwet depressions or scratching at the grinding processgrinding area must be slightly larger than the recess or scratching Office,and then washed and dried dirt and grease.2. Fill soil landfill: Please fill in the soil thin out the right amount of fill soilas needed with special spatula fill, slightly higher than the surrounding.3. Putty grinding: After completely hardened (about 1-2 hours at room temperature), with 320 # water sandpaper wet grinding smooth.If bubbles form, or when pits, repeat steps 2-3 job.4. The grinding is completed: Water with a fine sandpaper 600 # to mend completely wet grinding smooth.5. Paint finish: After completion, which can make the choice diy paint repair paint productsFeatures:Material: GreaseColor: See PicturesCapacity: about 15gIngredients: synthetic resins, pigments, fillersHardening time: 1-2 hours (at room temperature)Can be used to fill and level up dents with depth of less than 2mm, deep scratches or varnishesPackage Contents:1 x Putty 15g1 x Scraper2 x 320# water sandpaper2 x 600# water sandpaper1 x sandpaper pad