Name: Electronic Drain Valve Model: 507292 Indicator Lamp: LED indicating power on/off Voltage Range: 10% Protection Grade: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Temperature: 90C Operating Temperature Range: -40C to 60C Maximum Current Consumption: 4 mA Power Supply Voltage: 24240 V AC/DC, 50/60 Hz Discharge Time (ON): 0.510 seconds Time Interval (OFF): 0.545 minutes Widely used in filters, separators, dryers, tanks, drip legs, and other compressed air system components For cleaning compressed air system installations Note the direction when installing the valve: do not use a hose at the outlet that cannot withstand air impact Power supply voltage must match the drain valve voltage: when using DC, the positive pole must be connected to terminal "1" When the drain valve is connected to the cable: brown is live (L), blue is neutral (N), yellow-green is safety ground (GND) Tighten the long screw on the terminal box securely to prevent water ingress Warning: When installing the electronic drain valve, ensure that: - Compressed air has been fully released (system is at zero pressure) - Power supply is switched off Color: Gold + Black Material: Metal Flow: 5 mm Inlet/Outlet Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: The package includes only the items listed above. Other products are not included. Note: Lighting and display differences may cause slight color variations between the image and the actual item. Measurement error allowance: 13 cm