Bicycle valve adapter Bicycle valve for SV DV AV Sclaverand Autoventil Dunlop Bicycle valve SV-DV DV-AV adapter The adapters fit all standard air pumps so that you can inflate different valves with one pump. Practical, especially for on the road. Anyone who likes cycling should have them by now. They are made of very good material and have cleanly cut threads without burrs or dirt. The 24 pcs adapters are supplied in a small bottle and are easy to carry. You always have the right adapter on the go. The adapters fulfill their purpose and are an excellent solution when different bicycle valves are present in a household.   Material:Copper Bicycle valve adapter Made of high-quality brass and rubber seal, strong and durable. The standard size adapter fits most bicycle pumps. Lightweight, easy and convenient to install. Convert your Presta valve / Dunlop valve / Woods valve to a Schrader valve, Presta valve to a Dunlop / Woods valve, a Schrader valve to a Presta valve. Use the pump to inflate inflatable toys, balloons, exercise balls, sports equipment, bicycle tires, etc.   Instructions: Remove the valve protection cap. Fully open the valve cap on the Sclaverand valve. Screw the valve adapter onto the Sclaverand valve . Place the air valve plug of the compressor firmly on the valve adapter and press down the locking clip . After "disassembly", do not forget to screw the valve closure of the Sclaverand. Valve again. Scope of delivery: 4 x Presta to Schrader bicycle valve adapters 2 x Dunlop / Woods to Schrader valve adapters for bicycle adapters 2 x Schrader-Presta bicycle valve adapters 2 x ball pump needle 2 x Black cone adapter 2 x plastic nozzle 10 x sealing rings