Outboard Remote Control Box Kit Low Corrosion 8M0075245 Accessory Replacement for Mariner Item Type: Outboard Remote Control Box Material: ABS + Aluminum Alloy Trim Harness: Approx. 2ft(60m) Manufacturer Part Number: 8M0075245 Replaces Prior Part Numbers: 883711A02 and 8M0041426Fitment: Replacement for Mariner Features: Dual Function Smooth Forward & Reverse Power Trim & Tilt Switch Easy e Description: Outboard Console Remote Control for Gen II Cables Furnished with single trim switch in handle for trim and trailering. Comes with 2ft. trim harness with the traditional 3 blade connector. All installations require an Ignition/Choke assembly and Throttle/Shift cables to complete the installation. 1. Dual Function You can choose single lever control or dual control. 2. Smooth Forward & Reverse To shift into forward and reverse, rotate the control lever downward about 35°to the F side and R side, respectively. When the control lever is further rotated downward, the throttle opens. 3. Power Trim & Tilt Switch The power trim and tilt switch is attached to the control lever grip and twin cover. Pushing it UP trims up and tilts up the engine and pushing it DOWN trims down and tilts down the engine. 4. Durable Control Cable A handle mounted trim switch and a 2ft trim harness. For non-power trim models. 5. Easy e Furnished with single trim switch in handle for simultaneous dual engine trim and trailering & individual fine tuning trim buttons in cover. 6. Replacement for Mariner Replacement for Mariner outboards (with integral trim). Also, 1993 and newer Replacement for Force outboards 40hp(with power trim).