Product name: Graphene & ceramic coatingSize:7.8*4.9*12cm/3*1.9*4.7 inch (approximately) Color: As shown in the figureFeatures:This is a new type of nano coating.Graphene molecules encapsulate silicon dioxide to form nanopolymer compounds,This nano molecule has excellent heat resistance, mechanical properties and opticalproperties, which can make the car surface have goodheat resistance, hydrophobicity, friction reduction andbrightness,last longer time on the paint1.First clean the car body .2.If there are oxidation layer on the paint, it is better to use car clay to remove the oxidation layer. 3.If there are scratches in the paint, it is necessary to use polishing wax to removethe scratches. After the above steps are completed. 4.First use the degreasing agent to remove the remaining grease from the paint. 5.Dividing the paint into 40*40cm area and pour a small amount of coating onthe sponge, namely cross way to apply ceramic coating, daub is finished, wait for 2 to 3 minutes, Wipe off excess coating with a dry towel(The corner of the towelis hidden in the towel), then go to the next area, complete ceramic coatings in thesame way. 6.Note: if the air temperature is high, there is no need to wait 1-2 minutes after applying the ceramic coating. 30 second to 1 minute is OK. Do not touch water within 24 hours after finishing the ceramic coating. If the new car does not require 2, 3, 4 stepsAttention:1. As we all know , the different computers display colors differently, the color of the actual item may vary slightly from the following images.2.Please allow 1-2cm measuring deviation due to manual measurement.Shipment includes:1 pcs