Feature: 1. The main body shell is made of ABS engineering plastics, which has high strength, good toughness, drop resistance and good insulation 2. For the pointer display version, refer to the parameters indicated by the pointer meter to adjust the temperature required. 3. Draw a variety of different shapes on wood quickly and easily, which can be used to draw or write on wood, leather, gourd, etc. 4. After soldering, the soldering of iron oxide and iron carbide will cause damage to them and reduce thermal conductivity, please clean the soldering iron with a cleaning sponge 5. Complete tools, you can operate it yourself, suitable for DIY enthusiasts Specification: Item Type: Wood Burning Tool KitMaterial: Plastic + Iron Note for Pyrography Machine: 1. When loading the pen tip, the screw that tightens the pen tip should be pressed against the heating wire of the pen tip and tightened to avoid poor contact between the pen tip and the terminal, so that the tip is not hot, and the terminal is overheated to burn the accessories. If the terminal is too hot , That is, the tip of the pen is not tightened, so it must be tightened with a screwdriver in time. 2. When choosing the heating wire, you should choose an electric heating wire below 1 mm for the pen tip. Do not choose iron wire and other non-heating wire materials for the pen tip. It is dangerous to do so, and it is easy to burn all the accessories in the movement, and it is easy to get electric shock and fire.. Package List: 1 x Host 2 x Burning Brush2 Sets Pyrography Safety Pen Holder(2 x Base, 2 x Socket)2 x Pen Wipe Cleaning Sponge1 x Screwdriver30 x Branding Brush Head 1 x Small Gourd1 x User Manual Note: 1. The pyrography pen wiper sponge must be saturated with water before use.2. Because the coke produced at high temperature during pyrography has a certain degree of oil viscosity, it is easy to stick to the tip of the pyrography, which directly affects the effect of the pyrography. When there is carbon deposit on the pen, do not use metal or emery cloth to polish it. Worn pen heads seriously affect the service life of pen heads, and the pen head surface is rough.3. After carbon deposition occurs, use the high temperature cleaning carbon deposition sponge provided by us to clean the carbon deposition. It is convenient and safe. The pen can be wiped when it is hot, and it is ready to use.