Features: After the plates are adsorbed on the working face, the splicing of the plates is adjusted at a stable speed. If the working face is large, two splicing machines should be used to splice at the same time. If the vacuum cleaner cannot be operated at the same time, each device must be fine-tuned to prevent the suction cup and the working from moving laterally at the same time. When connecting small plates, make sure that they are on a horizontal and do not block each other. When connecting for the first time, and hold for one minute, check it, and then turn it on after one minute. Repeat 2 times to repeat the pairing board.<br><br>Specifications: Simple operation: simple operation, seamless splicing device for background wall of artifact table top. Application: Suitable for marble, , floor, mirror, plastic, glass or some flat holes that need to be adjusted. Aluminum Alloy Suction Cup: horizontal suction 110KG inclined suction 90KG Material: aluminum alloy colour: black+silver<br><br>Package Contents: 1 x vacuum chuck<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.