Step 1: Disconnect the negative battery terminal before working on the switch to prevent short circuit. Next, unclip the handles using a screwdriver.Lift the faulty switch out of its harness.Step 2: If you don't want to take off the door casing or the door handle, simply slide a flat-head screwdriver under The switch bezel and pry it until it loosens to access the housing.Step 3: Once the switch pops out of the bezel, disconnect it from the wire harness and detach it from the outlet. Remove the rockers before inserting a new switch into the harness holes.Step 4: Assemble the rockers into the new switch and snap the device into the bezel.Compatible With:for Peugeot Boxer II 2006-2016for Citroen Jumper 2006-2016for Fiat Doblo Grossraumlimousine 263 2010-2014for Fiat Doblo Kasten/Kombi 263 2010-2014for Fiat Ducato Bus 250 2006-2014for Fiat Ducato Kasten 250 2006-2014Colour:BlackMaterial:PlasticPackage Contents:1x Power Window SwitchOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.