説明
Description
1.Mount the camera in the license area of the license plate
2.Adjust the camera lens to the best position.
3.Connect the power cord (red and black) to the headlight wiring of the cars power cord.
4.Connect the video output (yellow line) to the display.
About the rear view camera system of the car:Typically,most monitors support NTSC and PAL TV systems.Therefore,it is not important that the camera is a PAL or NTSC system.
Power:DC 12V
View Angle:170 degree
Image Sensor:CCD1/4
TV system:NTSC
Operating Temperature:-35 Celsius ~+60 Celsius,RH95% Max
Storage Temperature:-35 Celsius ~+80 Celsius,RH95% Max
Horizontal Resolution:520 TV lines
Lens:18.5mm
Sync.System:internal
S/N Ratio:more than 48Db
Electronic Shutter:1/60 to 1/100,000 seconds
Video Output:1.0Vpp,75Ohm
White Balance:Auto
Water-proof:IP68
Video Cable Length:about 6m
Power cable length:about 1m
Colour:Black
material:plastic
Package Contents:
1* camera
1* video cable
1* power cord
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
-
Fruugo ID:
423504176-891136522
-
EAN:
8753799930066
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
Important Safety Instructions
Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction.
General Warnings
Intended Use: Use this product only for its intended purpose as described in the user manual.
Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision.
Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged.
