Description <br> 1. Unique design, convenient to use. Made of fireproof and environmental ABS material. <br> 2. Perfectly suitable for some models of cars, directly installed in the reserved switch hole. <br> 3. Two temperature sensors can display the temperature inside and outside the car at the same time. <br> <br> Operating voltage: 12V <br> Temperature measurement range: -20-70 <br> Temperature sensor wire length: 295cm/95cm <br> Fuse: F4AL250V <br> Production according to 1:1 ratio of the car interface <br> Installation : <br> 1. Use a steel ruler or plastic sheet to pry off the blank buttons on the dashboard of the car <br> 2. To electricity, you can connect to the lighter, battery, or fuse box. If you connect to the fuse box, you can buy electrical appliance, which is simpler and <br> 3. The probe lead in the car can be placed near the drivers accelerator brake, or a small hole can be drilled on the dashboard to lead out the probe. <br> The temperature probe wire outside the car can be placed in the door seam, under the mirror or other suitable installation place <br> Some suitable models for: <br> 2004---2009 <br> 2005---2008 <br> Prado 2004---2006 <br> 2009 <br> Prius 2005---2006 <br> 2013---2016 <br> Senna 2005 <br> Hiace 2011 <br> Material:plastic <br> colour:black <br> <br> Package Contents: <br> 1 x dual temperature sensor <br> <br> Only the above package content, other products are not included. <br> Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. <br>