Origin:Mainland China Certification:NONE 1. Beautifully designed shell body, easy to take pictures and take pictures at the same time. High sensitivity motion detection function. The 4.0-inch high-resolution IPS display screen can immediately see the pictures taken at the scene, and can be played immediately at the scene of an accident, clarifying the responsibility of the accident and reducing the occurrence of disputes. 2. Satisfy a variety of players to play directly, easily upload video sites. 100w pixel ultra-wide-angle high-definition 4-glass lens, the viewing angle can reach 170, the line of sight can reach both sides of the front end of the car, and there is no dead angle for complete recording. TF card using CLAS5-10 or above storage device, maximum support 32GB. Easy to install, keep the appearance of the car 3. Gravity induction, which can clearly grasp the impact force of the vehicle. When the impact is sensed, the gravity induction starts to automatically save this important video. (The video saved in this section will not be overwritten by the loop) 4. Chipset Manufacturer: Novatek; View angle: 170; Item Type: Car DVR; Max External Memory: 32G; LCD screen size: 4 inches; Camera: 2 million pixels; Video format: MOV; Video resolution: 1080P/720P/VGA 30FPS; Photo resolution: L3M, 2M, , 5M, 8M, 10M, 12M; Photo format: JPG; Memory card type: TF card, maximum support 32GB; Pull back camera: support 5. Language settings: Simplified Chinese, Traditional Chinese, English, French, Spanish, Portuguese, German, Russian, Japanese, etc. Microphone/Speaker: Support; USB interface: USB 2.0 5pin; Power interface: USB 2.0 DC5V 1.5A; Frequency: 50Hz/60Hz; Battery: 300mAh3,7 polymer lithium battery; Working current: 590mA; Storage temperature: -30-70; Operating temperature: 0-50 Installation Guide: 1. Turn off the car engine and turn off the recorder. 2. Insert the TFcard (Class 6 and above) into the card slot of the recorder [Note] For the first use, the TF card needs to be formatted in the recorder 3. Fix the recorder on the original rearview mirror of the car 4. Insert the car charger into the car cigarette lighter, and insert the other end into the USB interface of the recorder. [Note] When wiring, the charging extension cable can be laid along the edge of the windshield of the car 5. When installing the rear camera, first connect the plug to the recorder interface, and then route the wire from front to back along the vehicle shed. Install the rear camera at the rear of the vehicle. The red wire is connected to the positive pole of the reversing light, and the black wire is not connected. Ground wire, pay attention to the direction when installing. 6. Adjust the lens position to ensure that the lens is level with the ground. 7. Start the engine and check if the machine is installed correctly color:Black Material:plastic size:112 x 61 x 33mm Package Contents: 1 x Car DVR Camera Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.