Selling PointNote1:Pls Use the vehicle fitment weve provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order.Note2:No programming Required : The Vehicle Sensors Tire Pressure is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or re-learning. Simplified Relearn : OBDII required Installation ofis recommended to be performed only by trained professionals.ApplicationFor Infiniti Q70(from 2013-10 to 2018-09) For Infiniti Qx(from 2013-01 to 2020-06) For Infiniti QX50(from 2016-01 to 2018-04) For Infiniti QX70(from 2016-01 to 2019-03) For Infiniti QX80(from 2014-04 to 2022-07) For Nissan 370Z (Z34)(from 2014-08 to 2019-12) For Nissan GT-R (GT/R35)(from 2013-12 to 2020-03) For Nissan Juke (F15)(from 2010-08 to 2015-09) For Nissan Leaf (ZE0)(from 2010-11 to 2016-12) For Nissan Murano (Z51)(from 2015-01 to 2021-07)SPECIFICATION : Replace For Part Number: PMV-CA14 40700-6WY0A 40700-6WY0B Battery Life: ABOUT 3 YEARS Operating Frequency: 433MHz PACKAGE CONTENT : NORMAL PACKETCOMPREHENSIVE VEHICLE COVERAGE Installation Process 1. Loosen the tire: Remove the valve cap and core and deflate the tire. 2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 oclock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head. 3. Dismount the : With a screwdriver remove the fastening screw and from the Valve stem, then loosen the nut and remove the valve. 4. Mount and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the body against the rim and tighten the screw. 5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.FAQQ: Frequently ofA: 433mhzQ: Did they need to make programA: The Vehicle Sensors Tire Pressure come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool oar re-learning.Q: Relearn Procedure A: OBDII required